Loading... Please wait...
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED
  • To suit 2.0L, 1.8L Zetec E engines in RWD Kit car etc

Build a high performance tubular inlet plenum in under an hour

You will need to cut, weld and drill these parts

Kit contents

ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.

8mm SURFACE GROUND HEAD FLANGE
4X ENDFORMED 45mm PRIMARIES
4X INJECTOR BOSSES 
4X SPOUTS 
4X TRUMPETS
2X FUEL RAIL MOUNTS
1X IRV MOUNT
1X THREADED TEMP SENSOR BOSS
1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
1X PLENUM END CAP 
1X THROTTLE MOUNT PLATE




PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED

DIY FWD FORD ZETEC PLENUM CHAMBER KIT WELD TOGETHER

£108.00
Weight:
5.00 KGS
Shipping:
£7.00 (Fixed shipping cost)
Minimum Purchase:
1 unit(s)
Current Stock:
6
Quantity:

Product Description

To suit 2.0L, 1.8L Zetec E engines in FWD Kit car etc
 
Build a high performance tubular inlet plenum in under an hour
 
You will need to cut, weld and drill these parts
 
Kit contents
 
  • ALL PARTS ARE MILD STEEL SO WILL MIG, TIG, GAS WELD OR BRAZE TOGETHER.
 
    • 8mm SURFACE GROUND HEAD FLANGE
    • 4X ENDFORMED 45mm PRIMARIES
    • 4X INJECTOR BOSSES 
    • 4X SPOUTS 
    • 4X TRUMPETS
    • 2X FUEL RAIL MOUNTS
    • 1X IRV MOUNT
    • 1X THREADED TEMP SENSOR BOSS
    • 1X 330MM LONG 76MM PLENUM CHAMBER WITH PRE CUT HOLES
    • 1X PLENUM END CAP 
    • 1X THROTTLE MOUNT PLATE
    •  

    •  

    • PLEASE NOTE THESE ARE DIY KITS TO BE WELDED TOGETHER BY YOU TO SUIT YOUR CAR CUTTING, WELDING AND DRILLING WILL BE REQUIRED 

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review




Recent Updates

Newsletter


Connect with us Facebook Twitter

Click the button below to add the DIY FWD FORD ZETEC PLENUM CHAMBER KIT WELD TOGETHER to your wish list.